USB-Cable
Use Push as a control surface for Live on a computer by connecting it via USB.
Specifications:
USB-C to USB-C cable
Length: 100 cm / 39 in
The USB-cable is included in the Push 3 box.
Merchandise
Push MIDI Adapter
Use the Push MIDI Adapterās 5-pin MIDI jack to send or receive MIDI data from an external instrument.
3.5 mm plug to Type A 5-pin MIDI jack
Compliant with the MIDI Manufacturers Association TRS MIDI Specification.
Length: 23 cm / 9 in
Push CV Adapter
Use the Push CV adapter to send CV from Push's pedal ports to your modular gear. With two adapters you can send up to four CV signals from Push.
Single 6.3 mm TRS plug to dual 3.5 mm TS jacks.
Length: 23 cm / 9 in
Push 3 Encoder Knob (set of 4)
Specifications:
Four Encoder Knobs
Height: 1.5 cm / 0.59 in
Diameter: 1.2 cm / 0.47 in
Push 3 Volume Knob
One Volume Knob. Height: 1 cm / 0.39, Diameter: 2.4 cm / 0.94 in.
Push 3 Swing & Tempo Knob
Specifications:
One Swing & Tempo Knob
Height: 1 cm / 0.39
Diameter: 1.6 cm / 0.63 in
Push 3 Power Supply Base
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Supply Base only works in combination with a Power Cable (sold separately).
Specifications:
Input: 100-240 V ~50/60 Hz, 2.0 A
Output: 20 V --- 3250 mA
C8 connector; non-polarized
Length: 150 cm / 59 in.
The Power Supply Base is included in the Push 3 box.
Power Cable (South Korea)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type C plug to C7 connector; non-polarized (KCC compliant)
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Power Cable (China)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type A plug to C7 connector; non-polarized (CCC compliant)
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Power Cable (AU/NZ)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type I plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Power Cable (UK)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type G plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Power Cable (Europe)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type C plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Power Cable (North America, Japan)
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type A plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Men's T-Shirt Black
White Ableton logo on front, small "Ableton" on back. 100% organic cotton, classic cut.
Women's T-Shirt Grey
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, regular fit.
Women's T-Shirt Black
White Ableton logo on front, small "Ableton" on back. 100% cotton, regular fit.
Men's T-Shirt Grey
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, classic cut.
Hoodie Black Unisex
White Ableton logo on front. 85% organic cotton, 15% recycled polyester
Sweatshirt Grey Unisex
Black Ableton logo on front. 85% organic cotton, 15% recycled polyester
Sweatshirt Grey Unisex
Black Ableton logo on front. 80% cotton, 20% polyester.
Push 2 Power Supply
Length 1.50m, 100-240VAC, 50/60Hz including 5 interchangeable adaptor tips for North/Central America & Japan, China, Europe, UK, Australia & New Zealand
Push 2 USB Cable
Length 1.40m, Ableton logo on right-angle connector
Push Adapter Bundle
Use the Push Adapter Bundle to easily connect Push to multiple pieces of MIDI and CV-compatible gear. Send MIDI data to or from even more devices with the bundleās two MIDI Adapters, and transmit up to four CV signals using the two CV Adapters.